Series electric hydraulic thrusters, electric hydraulic thruster manufacturers, Shandong hydraulic thrusters Li Manager series electric hydraulic thrusters: mainly used for series operating brakes, as mechanical systems for lifting, transportation, driving and other similar driving devices. Use.
:
The electric hydraulic pusher consists of two parts, the driving motor and the body (centrifugal pump). The body part consists of a cover, cylinder, piston, impeller and rotor.
When energized, the motor drives the transmission shaft and the impeller on the rotating shaft to rotate, generating pressure in the piston. Under the influence of this pressure, oil is sucked from the upper part of the piston to the lower part of the piston, forcing the piston and the push rod fixed on it. and the beam rises rapidly. The lever mechanically compresses the load spring (the pusher or brake has a load spring) to produce mechanical movement. (If it matches the series hydraulic pusher, the brake will be released).
When the power is off, the impeller stops rotating, and the piston drops rapidly under the action of the load spring force and its own gravity, forcing the oil to flow back into the upper part of the piston. At this time, it is still restored to its original position through the lever mechanism. (If it matches the series brake, the brake will be held).
Integrity, quality, efficiency, and innovation are our eternal themes. Quality-oriented, technological innovation, pursuit of excellence, and eternal creation are our unchanging service concepts.
Electric hydraulic thruster